EVG GE 12/102-PV - Wire mesh welding line 2023041

1 x EVG Mesh Welding plant, Type GE 12/102-PV, year of production 2005, installed in 2006

For production of standard reinforcing mesh with line wire spacing of 100 mm and multiples.

Working with line wires off vertical pay-off and pre-straightened and cut-to-length cross wires off a magazine.

BASIC DATA:

Max welding width:                2600 mm

Max cross wire length:            2750 mm

Min mesh width:                     1200 mm

Max. mesh length:                  7000 mm

Min. mesh length:                   1000 mm

Line wire diameter off coil:     4 – 8 mm (at 100 mm line wire spacing)

                                                4-10 mm (at 150 mm line wire spacing)

Cross wire diameter:               4 – 10 mm pre-straightened and cut

Line wire spacing:                   100 mm and multiples

Cross wire spacing:                 50 mm , larger steps infinitely programmable

2 x Invert vertical type drawing ,machine (Cheng I machinery, Taiwan), year of production 2007

Model: IVD-800 (ribbing model)

Inlet wire:                                            10 – 6 mm, low carbon wire

Motor:                                                 100 HP, AC motor with inverter (Brand TECO)

Dia. Of the drum:                                800 mm, made of alloy cast iron, the wire drawing zone (220 mm high) is made of tungsten carbide coating

Speed:                                                 0 – 150 m/min.

Cooling system:                                   both inside drum and die are water cooling

Spooler:                                              with 3 HP AC motor with inverter, coils 0 – 1500 kg

1 x Wafios, fully electronic wire straightening and cutting-off machine, model R 43, year of production, 2007

2 pairs of separate driven feed rolls, frequency regulated, pneumatically open and close.

Separate driven rotary body straightener, frequency regulated.

Stationary shear, servo motor driven.

Change over time:                  1 – 3 minutes

Length tolerance:                    +/- 0,3 mm, depending on wire size, wire quality, condition of coil and pay off

Collecting station:                   3 m